Arduino Basics

Description In this tutorial, I will show you how to configure and extract data from the magnetometer (HMC5883L) sensor on the GY-80 10DOF module from ICStation. While there are some very good libraries on the internet which will give you full access to this sensor, I will show you what you need to know without using a library. This means that it may get a bit technical at times, but I will hold your hand along the way and provide explanations as required. I would also recommend that you watch the complete video from start to finish - as the video provides really useful information.   Parts Required: Arduino UNO (or compatible board) GY-80 10DOF Module HMC5883L Magnetometer Datasheet: You can find the datasheet for the HMC5883L pretty easily by searching on the internet. Here are a couple of sources: ...